Valve Lever
- 95810541700
The rocker arms in the engine of your Porsche are used to open and close the engine valves. The rocker arms ride on the shaft above the valves with half of the rocker arm over and in contact with the valve stem and the other half sitting on a hydraulic or mechanical valve lifter/cam follower or a pushrod. As the camshaft turns, lobes on the camshaft raise and lower the lifters and pushrods (if equipped) which in turn raise and lower the rocker arms in a teeter totter movement to open and close the engine valves.
Rocker arm failure can occur causing engine noise, a rough running engine, lack of performance, and engine stalling.
Replacing Your Porsche Rocker Arm
Rocker arm replacement requires removing the valve cover. Rocker arm failure can be caused by faulty lifter/cam followers, and it is recommended to replace all rocker arms, rocker arm shafts, lifter/cam followers, and push rods if equipped at the same time to prevent future problems.
Failure of rocker arms can also be caused by stuck or sticking engine valves. Inspection of the engine valves and verification of engine valve movement is necessary to ensure proper function of all valves. Rocker arms damaged by a stuck or sticking valve will require the removal of the cylinder head to remove and replace the engine valves.
Porsche Rocker Arms.
“Left/Right or Front/Rear” notes means the part fits the left or right side of the car. These parts are still sold individually and you’ll
need to select the appropriate quantity if you plan to replace more than one of this item.





Reviews
There are no reviews yet.